RIGXAN-L PLUS
haga clic en este enlace para descargar descripción en español
RigXan-L plus tm is a liquid viscosifier slurry, containing high purity clarified Xanthan gum suspended in an environmentally acceptable synthetic base fluid.
Typical Physical Properties
Appearance | Tan Liquid |
Odor | Mild Alcohol |
Specific Gravity @ 60°F | 1.12 – 1.132 |
Density (lbs./gallon) | 9.6 |
Flash Point | >168°F |
pH | 5.5 – 7.5 |
Advantages
- Faster yielding than dry xanthan polymer, RigXan-L plus tm provides reliable rapid dispersion.
- Smooth, uniform solution viscosity with no lumping.
- No “fish eyes” or other dispersion problems are encountered due to the exceptional mixing characteristics of RigXan-L plus tm
- Compatible with most drilling muds and workover /completion fluids.
- No pack-down, settling, or separation – remains pourable.
- Passes stringent MMS oil/grease regulations for discharge offshore of < 29ppm
- Formulated with the highest quality ingredients, 42% by wt, dry polymer per pail
Application
RigXan-L plus tm is compatible with typically used completion, drilling and stimulation fluids. The product mixes easily in fresh water and a variety of brines. For an application rate specific to your requirements please contact the Rig-Chem, Inc. sales and technical support staff.
Handling
Improper handling of this product can be injurious to workers. Observe all safety precautions shown on the label and in the Material Safety Data Sheet.